Manus-Bond 75-AM Industrial Grade adhesive applied on various materials including steel and vinyl, highlights its adhesion, weather resistance, and paint compatibility.

Manus-Bond 75-AM Perm Flash

Manus Bond Perm-Flash Liquid Membrane by Manus Products, Inc is the latest advancement in liquid applied building envelope membranes. A hybrid  elastomeric adhesive/sealant that forms a permanently flexible barrier preventing undesirable water and air through building envelopes. Perm-Flash is breathable—allowing damp surfaces to dry.

A virtual living skin for buildings that bonds to a wide variety of building envelope substrates including, gypsum board, OSB, plywood, concrete, CMU, cement board, steel, aluminum, Kynar ®, Galvalume®, painted  surfaces and many vinyls and plastics. Perm-Flash liquid membrane is used to seal rough openings, flash windows and doors and as a complete building membrane. Perm-Flash’s unique moisture cure formulation cures fast and can be applied over a wide temperature range. It cures in the presence of water and remains flexible, is non-sag and has exceptional resistance to weathering, UV light and temperature extremes. Perm-Flash will not tear and remain durable when exposed to weather
during construction.

Perm-Flash is an environmentally compliant coating that is classified as very low VOC, does not contain water, solvents or isocyanates and is mildew resistant when fully cured. USDA accepted. 

Technical Details

Specific Gravity

1.5-1.7

Color

Teal Green

Skin Time

30 Min @ 75F/50% RH

Hardness (Shore A)

40-45

Tensile Strength

180 Psi

Elongation

400%

Peel Strength

25 Pli

Sag

Nil

Service Temperature

-75F To 300F

Voc Content

30 Grams/Liter Max

Compatible Materials

Additional Details

Packaging

Bulk packaged in 1, 5 and 55 gallon containers. Convenience packaged per order in 10.1 and 28fl.oz. cartridges or 20 fl.oz. sausage packs.

Application

Perm-Flash will produce an opaque membrane when applied at the recommended 12-15 wet mils to simplify quality control and inspection. At 12-15 mils the estimated coverage is 1 square foot per 0.85 fl.oz. Bonds to damp substrates and cures in wet weather. Before use read Surface Preparation and review MSDS.

Surface Preparation

Apply to clean surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Some substrate materials may not be compatible with this  product. Testing substrate compatibility with this product before full application is recommended. Ensure positive drainage at all rough openings. 

Painting

Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.  

Storage Life

For maximum shelf life, store unopened product at or below 80ºF.
12 months = cartridges and sausage packs
6 months = 1, 5 and 55 gallon containers.

Precautions

Some applications may not be compatible with this product. Some cleaners, solvents may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and
cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. See MSDS for additional information. KEEP OUT OF REACH FROM CHILDREN. 

Technical Service

Manus technical representatives are always available to provide assistance. Please contact our Technical Service Department with your questions or requests for specific applications.

Limited Warranty

Any goods proved defective will be replaced or the purchase price refunded.  The limited warranty described herin is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling or storage.